Here are a few tips to get the best results from our Outdoor Odor Eliminator. 

  1. Shake the bottle vigorously before every use. This prevents the different ingredients from settling. Shaking the bottle makes sure the treatment is evenly applied. 
     
  2. Do not use other chemicals with this treatment. The liquid contains beneficial enzyme producing bacteria that can be harmed if they come into contact with chemicals like bleach.  
     
  3. For the best results apply in the evening. This limits evaporation and allows the treatment to work for longer.  
     
  4. Lightly over spray the recently treated area with water before it dries. (Not necessary but will make the treatment even more effective) 

Still have questions?

info@ecostrong.com

1 800 677 0517

Our hours are Monday to Friday, between 7:00 AM and 5pm CST

If you are using the Multi-use sprayer that came with the product, then no, you do not need to pre-dilute it. The product will be diluted by the sprayer when the hose is turned on.

It isn't an exact science, but spray enough to thoroughly saturate the affected area. Slowly walk backwards, moving the sprayer from side to side for even coverage.

Yes, pour 32 oz of undiluted Outdoor Odor Eliminator into the empty sprayer.

It depends on the surface you are treating and how much use the area gets. For example, grass needs more treatment applied as compared to rock. Use enough to thoroughly saturate the desired area. One gallon can treat up to 2,500 square feet.

No, applying a bit of water helps keep everything moist longer but it will work even without this step.

Odor relief will last anywhere from 5 days to 3 weeks, depending on how often and how many animals are using the area.

No, it is non-toxic and safe for people, pets and plants when used as directed. 

How To Use: Multi-use Sprayer

How to Assemble the Sprayer (legacy label)

Multi-Use Sprayer Assembly Instructions

How to Assemble the Sprayer

  1.  Check that you have all the necessary parts. Fan Nozzle, Suction Pipe, Green Mix Head, Connector, Flow Valve, and Adapter
  2. Assemble the sprayer based on the pictures(s) above
  3. Set the mix ratio wheel to the letter D (table below for mixtures)
  4. Shake the product before filling the reservoir with undiluted Outdoor Odor Eliminator. Then screw the mix head on the reservoir.
  5. Before turning on the hose water, ensure that the control valve is set to the “OFF” position.
  6. Turn the hose water on and attach the garden hose to the sprayer. Slowly the turn control valve to the ON position.
  7. Apply a heavy soaking amount of product to the affected area(s).
  8. When finished. Turn off the hose, turn the control valve to OFF, remove and rinse the reservoir, refill the reservoir with water, re-attach to the mix head, turn the water back on, open the control valve to ON, and spray only water to clean the mix head

Need more help? Give us a call on 1 800 677 0517 or send us an email at info@ecostrong.com